What is Flow Capture's uptime?

Over the last 90 days, Flow Capture reported 98.42% uptime on its official status page. That figure is calculated from the public incident timeline at https://status.moxion.io — each minute of degraded, partial-outage, or major-outage status counts against the total. Sign up to Pingoru free to see Flow Capture's uptime history rolling forward in real time.

Has Flow Capture had outages in 2026?

Yes — Flow Capture has had 158 incidents reported on its official status page so far in 2026. The full timeline (start times, durations, components affected) is shown above on this page. Pingoru re-checks the status page every 5 minutes so the count stays current.

When was the last Flow Capture outage?

The most recent Flow Capture incident was "Autodesk account", which started on September 11, 2026 and was resolved on September 11, 2026. Pingoru captured this directly from https://status.moxion.io. See the full incident card above for affected components and the update timeline.

How often does Flow Capture have outages?

Based on the last 90 days, Flow Capture averages 52.7 reported incidents per month on its official status page. Pingoru tracks each one with start time, duration, severity, and affected components — so you can see the pattern at a glance instead of digging through the vendor's archive.

Where is Flow Capture's status page?

Flow Capture's official status page is https://status.moxion.io. Pingoru polls it every 5 minutes and renders the same data here, alongside every other cloud or SaaS provider you depend on — so you can spot multi-vendor incidents (e.g. AWS + Stripe + Cloudflare degrading at the same minute) without flipping between tabs.

Is Flow Capture down right now?

Flow Capture is up. Pingoru checks the official status page every 5 minutes and flips this headline the moment Flow Capture reports a change. Current status is based on 67 tracked services.

How does Pingoru know if Flow Capture is down?

We read https://status.moxion.io directly, using Flow Capture's own status page. If the vendor reports an incident, you see it within one check cycle — not after someone manually marks the page as down.

Where can I get notified when Flow Capture has an outage?

Create a free Pingoru account and add Flow Capture as a monitor. You can filter to specific services, pick severity thresholds, and route alerts via email, Slack, Discord, or a webhook.

Flow Capture's status page says the service is up, but I'm having issues — what's wrong?

Three common reasons: • A real Flow Capture incident that hasn't been acknowledged on their public status page yet — vendor status pages are updated manually and typically lag the first customer reports by 10–30 minutes. • A regional or account-scoped issue affecting a subset of customers — these rarely trigger a global status-page change. • A local problem: ISP / DNS / your own software. Try reproducing from a mobile data connection and from a different network to isolate. If you suspect a real Flow Capture issue that isn't reflected yet, contact their support to escalate. Subscribing here means you get the alert the moment they do post an update.

Where does Pingoru get the official Flow Capture status?

We use Flow Capture's own status page at https://status.moxion.io. Nothing is read in a way the vendor hasn't explicitly made public — we use the same data their own dashboard uses. So our data is as accurate as what you'd see loading the status page yourself, but rolled into one dashboard alongside every other service you depend on.

All tracked Flow Capture components are reporting operational. No incidents are currently affecting service.

Is Flow Capture down?

Last checked 1m ago

Current status

Flow Capture is up

No incidents right now.

Get alerts when Flow Capture breaks → View Flow Capture outage history →

Free · no credit card

Official status page: https://status.moxion.io · Polled every 5 minutes · 67 components tracked

Flow Capture is operational right now. Last checked 1m ago; the most recent incident resolved 2d ago.

Real-time Flow Capture status, recent outages, and incident history — pulled directly from Flow Capture's official status page at https://status.moxion.io every 5 minutes. Pingoru tracks 67 Flow Capture services and has captured 158 incidents in the last 90 days (98.42% uptime). Get email, Slack, Discord, or webhook alerts the moment Flow Capture reports a new incident — free for 5 monitors, no credit card.

Users who monitor Flow Capture also follow these Video services:

Mux View all 6,000+ providers

Flow Capture uptime 98.42% uptime · past 90 days

Mon Wed Fri

JunJulAugSep

Less More

Recent outages & incidents

Past 90 days

Autodesk account

Resolved 1h 3m

Started Sep 11, 2026, 05:47 PM UTC · Resolved Sep 11, 2026, 06:50 PM UTC
Timeline · 3 updates
- investigating · Sep 11, 2026, 05:47 PM UTC
  
  We are investigating an issue where a subset of customers may be unable to access Autodesk products and subscriptions or manage users in Autodesk Account. We are actively looking into this and we will provide an update within 60 minutes or sooner if we have more information to share.
- investigating · Sep 11, 2026, 06:15 PM UTC
  
  We are continuing to investigate an issue where a subset of customers may be unable to assign new Autodesk products and subscriptions or manage users in Autodesk account. We will provide an update within 60 minutes or sooner if we have more information to share.
- resolved · Sep 11, 2026, 06:50 PM UTC
  
  The issue has been resolved. Thank you for your patience and understanding as we worked to resolve this issue.
Latest: The issue has been resolved. Thank you for your patience and understanding as we worked to resolve this issue.
Multiple Autodesk Products

Resolved 1h 13m

Started Sep 11, 2026, 05:49 AM UTC · Resolved Sep 11, 2026, 07:03 AM UTC
Timeline · 3 updates
- investigating · Sep 11, 2026, 05:49 AM UTC
  
  We are investigating an issue where customers are experiencing issues while trying to access project modules within multiple Autodesk Forma Products in the European Union and Australia region. We are actively looking into this and we will provide an update within 60 minutes or sooner if we have more information to share.
- investigating · Sep 11, 2026, 06:51 AM UTC
  
  We are continuing to investigate an issue where customers are experiencing intermittent slowness while trying to access project modules within multiple Autodesk Products in the European Union and Australia region. We subsequently determined that the cause of this issue is also affecting Forma Build. We will provide an update within 60 minutes or sooner if we have more information to share.
- resolved · Sep 11, 2026, 07:03 AM UTC
  
  The issue has been resolved. Thank you for your patience and understanding as we worked to resolve this issue.
Latest: The issue has been resolved. Thank you for your patience and understanding as we worked to resolve this issue.
Tinkercad

Resolved 10h 46m

Started Sep 11, 2026, 01:58 AM UTC · Resolved Sep 11, 2026, 12:45 PM UTC

Tinkercad
Timeline · 14 updates
- investigating · Sep 10, 2026, 09:04 PM UTC
  
  We are investigating an issue where Tinkercad customers are unable to access their accounts or existing project data due to authentication and Google SSO account provisioning issues impacting students' ability to sign in and continue coursework. We are actively looking into this and we will provide an update within 60 minutes or sooner if we have more information to share.
- investigating · Sep 10, 2026, 10:16 PM UTC
  
  We are continuing to investigate an issue where Tinkercad customers are unable to access their accounts or existing project data due to authentication and Google SSO account provisioning issues impacting students' ability to sign in and continue coursework. We will provide an update within 60 minutes or sooner if we have more information to share.
- investigating · Sep 10, 2026, 11:32 PM UTC
  
  We are continuing to investigate an issue where some Tinkercad customers signing in with Google Sign In are being prompted to create new accounts and are unable to access their existing project data. We have resolved a separate issue that prevented some Tinkercad customers from accessing their accounts. We will provide an update within 60 minutes or sooner if we have more information to share.
- identified · Sep 11, 2026, 12:38 AM UTC
  
  We have identified the cause of the issue where some Tinkercad customers signing in with Google Sign In are being prompted to create new accounts and are unable to access their existing project data. We have resolved a separate issue that prevented some Tinkercad customers from accessing their accounts. We are continuing to investigate and will provide an update within 60 minutes or sooner if we have more information to share.
- identified · Sep 11, 2026, 01:58 AM UTC
  
  We are continuing to work on resolving this issue where some Tinkercad customers signing in with Google Sign In are being prompted to create new accounts and are unable to access their existing project data. We have resolved a separate issue that prevented some Tinkercad customers from accessing their accounts as quickly as possible. We will provide an update within 60 minutes or sooner if we have more information to share.
- identified · Sep 11, 2026, 03:12 AM UTC
  
  We are continuing to work on resolving this issue where some Tinkercad customers signing in with Google Sign In are being prompted to create new accounts and are unable to access their existing project data. We have resolved a separate issue that prevented some Tinkercad customers from accessing their accounts. We will provide an update within 60 minutes or sooner if we have more information to share.
- identified · Sep 11, 2026, 04:29 AM UTC
  
  We are continuing to work on resolving this issue where some Tinkercad customers signing in with Google Sign In are being prompted to create new accounts and are unable to access their existing project data. We have resolved a separate issue that prevented some Tinkercad customers from accessing their accounts. We will provide an update within 60 minutes or sooner if we have more information to share.
- identified · Sep 11, 2026, 05:35 AM UTC
  
  We are continuing to work on resolving this issue where some Tinkercad customers signing in with Google Sign In are being prompted to create new accounts and are unable to access their existing project data. We have resolved a separate issue that prevented some Tinkercad customers from accessing their accounts. We will provide an update within 60 minutes or sooner if we have more information to share.
- identified · Sep 11, 2026, 06:35 AM UTC
  
  We are continuing to work on resolving this issue where some Tinkercad customers signing in with Google Sign In are being prompted to create new accounts and are unable to access their existing project data. We have resolved a separate issue that prevented some Tinkercad customers from accessing their accounts. We will provide an update within 60 minutes or sooner if we have more information to share.
- identified · Sep 11, 2026, 07:35 AM UTC
  
  We are continuing to work on resolving this issue where some Tinkercad customers signing in with Google Sign In are being prompted to create new accounts and are unable to access their existing project data. We have resolved a separate issue that prevented some Tinkercad customers from accessing their accounts. We will provide an update within 60 minutes or sooner if we have more information to share.
- identified · Sep 11, 2026, 08:35 AM UTC
  
  We are continuing to work on resolving this issue where some Tinkercad customers signing in with Google Sign In are being prompted to create new accounts and are unable to access their existing project data. We have resolved a separate issue that prevented some Tinkercad customers from accessing their accounts. We will provide an update within 60 minutes or sooner if we have more information to share.
- identified · Sep 11, 2026, 09:40 AM UTC
  
  We are continuing to work on resolving this issue where some Tinkercad customers signing in with Google Sign In are being prompted to create new accounts and are unable to access their existing project data. We have resolved a separate issue that prevented some Tinkercad customers from accessing their accounts. We will provide an update within 2 hours or sooner if we have more information to share.
- identified · Sep 11, 2026, 11:41 AM UTC
  
  We are continuing to work on resolving this issue where some Tinkercad customers signing in with Google Sign In are being prompted to create new accounts and are unable to access their existing project data. We have resolved a separate issue that prevented some Tinkercad customers from accessing their accounts. We will provide an update within 60 minutes or sooner if we have more information to share
- resolved · Sep 11, 2026, 12:45 PM UTC
  
  The issue has been resolved. Thank you for your patience and understanding as we worked to resolve this issue.
Latest: The issue has been resolved. Thank you for your patience and understanding as we worked to resolve this issue.
APS - Data Management

Resolved —

Started Sep 10, 2026, 08:19 PM UTC · Resolved Sep 10, 2026, 08:19 PM UTC
Timeline · 1 update
- resolved · Sep 10, 2026, 08:19 PM UTC
  
  On September 02, 2026 at 09:00 AM PDT, Autodesk identified an issue where customers were unable to create storage locations, preventing them from uploading and publishing files in APS - Data Management in Canada, UK, Germany, India and Japan regions. Once the issue was resolved on September 8, 2026, at 4:01 PM PDT, all services returned to normal operation. This is a retroactive notification as this issue did not display on the Autodesk Health Dashboard at that time. Thank you for your patience and understanding.
Latest: On September 02, 2026 at 09:00 AM PDT, Autodesk identified an issue where customers were unable to create storage locations, preventing them from uploading and publishing files in …
Forma Build | Forma Data Management

Resolved 3h 33m

Started Sep 09, 2026, 03:14 PM UTC · Resolved Sep 09, 2026, 06:47 PM UTC
Timeline · 5 updates
- investigating · Sep 09, 2026, 03:14 PM UTC
  
  We are investigating an issue where customers are experiencing delays when uploading files and copying project templates and related documents in Forma Build and Forma Data Management in the US region. We are actively looking into this and we will provide an update within 60 minutes or sooner if we have more information to share.
- investigating · Sep 09, 2026, 04:13 PM UTC
  
  We are continuing to investigate where customers are experiencing delays when uploading files and copying project templates and related documents in Forma Build and Forma Data Management in the US region. We will provide an update within 60 minutes or sooner if we have more information to share.
- monitoring · Sep 09, 2026, 05:14 PM UTC
  
  We have implemented a solution to resolve the issue where customers are experiencing delays when uploading files and copying project templates and related documents in Forma Build and Forma Data Management in the US region and our team is currently monitoring the situation. We will provide an update within 60 minutes or sooner if we have more information to share.
- monitoring · Sep 09, 2026, 06:26 PM UTC
  
  We have implemented a solution to resolve the issue where customers are experiencing delays when uploading files and copying project templates and related documents in Forma Build and Forma Data Management in the US region and our team is currently monitoring the situation. We will provide an update within 60 minutes or sooner if we have more information to share.
- resolved · Sep 09, 2026, 06:47 PM UTC
  
  The issue has been resolved. Thank you for your patience and understanding as we worked to resolve this issue.
Latest: The issue has been resolved. Thank you for your patience and understanding as we worked to resolve this issue.

See the full Flow Capture outage history

125 more incidents in the last 90 days, plus the full multi-year archive of per-service events and update timelines.

Browse Flow Capture outage history →

Or sign up free to get alerts when Flow Capture breaks · 10 free monitors · No credit card

Outage history

Past 90 days · 130 incidents View full outage history →

Autodesk account Resolved

Started Sep 11, 2026, 05:47 PM UTC · Resolved Sep 11, 2026, 06:50 PM UTC · 1h 3m
Multiple Autodesk Products Resolved

Started Sep 11, 2026, 05:49 AM UTC · Resolved Sep 11, 2026, 07:03 AM UTC · 1h 13m
Tinkercad Resolved

Started Sep 11, 2026, 01:58 AM UTC · Resolved Sep 11, 2026, 12:45 PM UTC · 10h 46m
APS - Data Management Resolved

Started Sep 10, 2026, 08:19 PM UTC · Resolved Sep 10, 2026, 08:19 PM UTC · —
Forma Build | Forma Data Management Resolved

Started Sep 09, 2026, 03:14 PM UTC · Resolved Sep 09, 2026, 06:47 PM UTC · 3h 33m
Forma Build | Forma Data Management Resolved

Started Sep 08, 2026, 09:44 PM UTC · Resolved Sep 09, 2026, 01:43 AM UTC · 3h 59m
Forma Build Resolved

Started Sep 08, 2026, 08:37 PM UTC · Resolved Sep 08, 2026, 09:37 PM UTC · 59m
Forma Data Management Resolved

Started Sep 07, 2026, 04:42 PM UTC · Resolved Sep 07, 2026, 05:40 PM UTC · 57m